Vision EV5-D6S dSCR
These multiswitches automatically detect dSCR , SCR or legacy format from the receiver as well as SkyQ and Unicable dSCR formats .
Built into a zinc alloy diecast housing for extreme interference immunity and supplied with pre-mounted output earth bars.
EV5 dSCR multiswitches have the same connector pitch as existing Vision EV5 multiswitches for easy installation.
Vision EV5 dSCR multiswitches have an active terrestrial gain of up to 8 dB for a similar performance to existing EV5 multiswitches.
Cascadable 2, 4, 6 and 8-output single cable dSCR multiswitches for the distribution of satellite and terrestrial signals.
These multiswitches automatically detect dSCR, SCR or legacy format from the receiver as well as SkyQ and Unicable dSCR formats.
Built into a zinc alloy die-cast housing for extreme interference immunity and supplied with pre-mounted output earth bars.
EV5-dSCR multiswitches have the same connector pitch as existing Vision EV5 multiswitches for easy installation.
Vision EV5-D6S dSCR Features
- 5 input 5 output cascaded trunk line
- Ideal for insertion into existing 5-wire IRS trunk
- Control according to EN 50494/EN 50607
- Suitable for SkyQ, Unicable or Legacy mode
- Full Automatic Gain Control of satellite signal level on all outputs
- Always active terrestrial performance
- 4 x DC modes for convenient DC powering options
- Subscriber Cable Power
- Auxiliary DC input
- DC power to the trunk
- DC power from the trunk
Vision EV5-D6S dSCR Technical Specifications
|Item / Model||
|Frequency Range SAT||950MHz 2150MHz|
|TERR||5 – 790MHz|
|Number of Cascade Inputs/Outputs||4 SAT + 1 Terr|
|Number of dSCR / Legacy outputs||8|
|Number of SAT user bands||16 per output|
|Input level SAT (AGC)||60 – 95dBV|
|Input level Terr (max)||94dBV|
|Output at dSCR mode with DTT||SAT 84dBV (AGC) Terr 100dBV max|
|Output Legacy mode||SAT 78dBV Terr 100dBV max|
|Gain SAT / Terr||SAT AGC Terr +8dB|
|Trunk Loss SAT / Terr||<2dB / <1dB|
|SAT IF / SAT IF Isolation||>30dB|
|SAT IF Input / Output||>30dB|
|SAT IF / Terr||>25dB|
|DC Consumption from DC Input or H Lines||18V 1.1A|
|DC Consumption Terr TV amplifier via H lines||15 – 18V 70mA|
|DC Consumption from STB in legacy mode||13V 220mA : 18V 190mA|
|DC Consumption from STB in dSCR mode||14V 320mA|
|DC Consumption legacy + dSCR mode||18V 260mA|
|Max DC Pass into the trunk||18V 2.0A|
|Operating Temperature||-20C to +500C|
|Dimension inc connectors (mm) / Weight||226 x 133 x 30mm 830g|