PROception 8MP CCTV Video Balun

8mp Passive CCTV Video Balun 4K

SKU: PROBAL01 CATEGORY:

£4.95 £5.94 inc VAT

PROception 8MP CCTV Video Balun

One Tail One Non-Tail Balun (Pack of 2). No tail on one balun to allow more space in the IP box for a neater and easier installation.

The tail on the other balun allows movement to prevent cables from being damaged or dislodged at the back of the DVR.

  • 60 dB crosstalk and noise immunity
  • Compact size and easy installation
  • Outstanding interference rejection, transient protection
  • Indicated LED lights
  • Voltage of power: 12V~36V

Specifications

 

Video Format

NTSC, PAL, and SECAM

Frequency Response

DC to 5MHz

Attenuation

0.5dB typ

CMRR

60 dB

Impedance

Coax, Male BNC

75 ohms

RJ45

100 ohms

Environment

Storage Temperature

-10℃ to +50℃

 Storage Temperature

-30℃ to +70℃

Humidity

0 to 95%

Wire Type

UTP5

Connector

Male BNC, RJ45

Power

No

Case

ABS Plastic

Dimension

63mm*33mm*25mm with 12cm cable

Power-Distance Chart:

Using this product, cameras can be powered at extended distances, please refer to the chart below.

Power Supply Voltage

24VAC

28VAC

13VDC

Resultant Voltage

21VAC

21VAC

10VDC

100mA Camera

300m

700m

300m

300mA Camera

100m

230m

100m

500mA Camera

60m

140m

60m

Installation

Our PROBAL01 8MP Baluns are for use with good quality CAT5 or CAT6 cable.
There are two Baluns per pack and you will notice one has a BNC fly lead attached, the other simply screw terminals.

The reason for the difference is one Balun (The one with the tail) is for use at the rear of the DVR.
This allows for movement of the DVR, perhaps cleaning underneath, without dislodging the CAT cable.
The other Balun (The one with screw terminals) is made to fit inside a deep base ring or an 85mm x 85mm IP box, whilst taking minimum space.
Do not over tighten the screws onto the CAT cable as this will weaken the cable and cause the cable to snap.

Product Type

Balun

Manufacturer

Scroll to Top