9-Input, 12-output radial or cascade multiswitch

£184.16 £220.99 inc VAT

SKU 121301 Category

EV9-912 9-Input, 12-output radial or cascade multiswitch


  • Designed for large, medium and small, line or locally powered IRS installations
  • Power from the headend or anywhere on H: Hi/Lo trunk cables via a remote or local power supply
  • Terrestrial filter to suppress 4G/LTE interference
  • Slider attenuators/slope controls for stability and reliability
  • Fully-screened diecast housings for extreme interference immunity
  • Pre-mounted earth bars and 6mm2 earth post


There are five line/local – powered multiswitches in the V9-EVO range. The 8, 12, 16, 24 and 32 output mutliswitches are built in high-quality zinc alloy diecast housings for extreme immunity to interference as well as having high rigidity and stability for installation in all but the harshest indoor environments.

EV9 multiswitches are fully active minimising the need for headend amplifiers except in larger systems. Despite being active, EV9 multiswitches are designed for low current consumption where the built-in satellite amplifiers are only active if a satellite receiver is connected. This allows for only the terrestrial circuits and LNB to be powered via the trunk when no satellite signals are required.

All multiswitches have stepped gain at each bank of eight outputs to balance subscriber signal levels and allow long (up to 90m) and short subscriber cables to be connected to the same multiswitch. this reduces system complexity and cost, making the V9-EVO the professional choice.

The input attenuators on V9-EVO multiswitches use slider switches for accurate and reliable control of the signal levels. These attenuators will not change in value over time, unlike other designs, ensuring reliable and stable performance for life.



Number of Inputs8 x SAT + 1 x Terrestrial
Number of Outputs12
Frequency Range SAT IF950 – 2400MHz
Frequency Range Terr TV47 – 790MHz
Gain SAT IF Fixed Slope Pre-correctionOutput 1-4 – 9 to 14dB / Output 5-8 – 8 to 12dB / Output 9-12 – 7 to 10dB
Gain Terr TV Fixed Slope Pre-correctionOutput 1-4 – 4 to 9dB / Output 5-8 – 4 to 8dB / Output 9-12 – 3 to 7dB
Gain Adjustment Slide Attenuators, SAT IF12dB by 4dB steps
Gain Adjustment Slide Attenuators, Terr TVOutput 1 to 8 88dBµV Output 9 to 12 86dBµV
Output Level SAT IF (IMD3=35dB)93dBµV
Output Level Terr TV (DIN45004B)Output 1 to 8 88dBµV
SAT Input Isolation>30dB
Output Isolation>30dB
Current Consumption from Receiver<60mA
Current Consumption from H Lines or External Power Supply<160mA
Control Signals (Default SAT A)14/18V, 0/22kHz, tone burst DiSEqC 1.0, DiSEqC 2.0 or compatible
Operating Temperature Range-20º to 50ºC
Dimensions187 x 135 x 30mm



Spread the love
Scroll to Top
Open chat