EV9-408 9-wire 4-way Splitter

Available on back-order


A 9-wire 4-way Splitter designed for minimum insertion-loss and flatness across the satellite and terrestrial bands.


£203.28 £243.94 inc VAT

Available on back-order

EV9-408 9-wire 4-way Splitter

  • Designed for large, medium and small, line or locally powered IRS installations
  • Power from the headend or anywhere on H: Hi/Lo trunk cables via a remote or local power supply
  • Terrestrial filter to suppress 4G/LTE interference
  • Slider attenuators/slope controls for stability and reliability
  • Fully-screened diecast housings for extreme interference immunity
  • Pre-mounted earth bars and 6mm2 earth post

Plug directly onto EV9 multiswitches or amplifiers using quick-link F-connectors.

Pass 18v DC on the horizontal lines which can be isolated on the tap output with the built in switch.

Colour coded inputs on all components for simplicity.

Earth bonding-bars fitted. Designed for small, medium and large IRS installations.

There are five line/local – powered multiswitches in the V9-EVO range.

The 8, 12, 16, 24 and 32 output mutliswitches are built-in high-quality zinc alloy diecast housings for extreme immunity to interference as well as having high rigidity and stability for installation in all but the harshest indoor environments.

EV9 multiswitches are fully active minimising the need for headend amplifiers except in larger systems.

Despite being active, EV9 multiswitches are designed for low current consumption where the built-in satellite amplifiers are only active if a satellite receiver is connected.

This allows for only the terrestrial circuits and LNB to be powered via the trunk when no satellite signals are required.

All multiswitches have stepped gain at each bank of eight outputs to balance subscriber signal levels and allow long (up to 90m) and short subscriber cables to be connected to the same multiswitch. this reduces system complexity and cost, making the V9-EVO the professional choice.

The input attenuators on V9-EVO multiswitches use slider switches for accurate and reliable control of the signal levels.

These attenuators will not change in value over time unlike other designs, ensuring reliable and stable performance for life.


Model: EV9-408
Frequency range SAT: 8 x 950  2400MHz
Frequency range Terr: 1 x 5  862MHz
The number of tap outputs: 4 x 9 splitter
Through loss SAT: 8dB
Through loss Terr: 8dB
Tap loss SAT:
Tap loss Terr:
Input Isolation SAT: 30dB
Input Isolation Terr: 30dB
DC through pass: 2.0A max (switchable to tap or split legs)
Dimensions mm: 248 x 114 x 50.5
Weight: 1.2kg


Scroll to Top